mobil phone: Exclusive secret codes Siemens

Secret codes

Siemens
Models: ALL
Classified information.

3 different PINs


Affiche des infos sur le logiciel" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">* # 06 # then press left long button -> Displays information about the software

déblocage opérateur (remplacez xxxxxxxx par le code de déverrouillage)" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">* # 0003 * xxxxxxxx # -> Unlock operator (replace xxxxxxxx with the unlock code)

Remise à zéro de la langue en automatique" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">* # 0000 # then green button -> Reset the automatic language


Enter the unlock codes operator


Enter * # 0000 * # votrecode

Enter the unlock codes operator

Turn your phone without sim card then dial:

* # 0000 * # VotreCode

then:

* # 0001 * # VotreCode

Secret codes of Siemens

Hi

Secret codes:
All models:
SP unlock * # 0003 * (secret code 8 digits) #
* # 06 # for checking the IMEI (International Mobile Equipment Identity)
Replace the original language: * # 0000 # then green button

SIEMENS easter eggs


Try to memorize the number +12022243121 directory as
"My phone number". You have to screen a nice drawing
and a list of names of programmers soft!

Siemens Gigaset 2000 and 1000 cordless

Enter 147 for entering the service menu.
Then bring 46,395 to enter the monitor menu.


Siemens C25:

* # 0000 # then green button. This code is used to reset the default language of the SIM card.
Net Monitor (S4 Power): Menu 9 & 8, left SoftKey, 7 6 8 4 6 6 6, red button,
Menu 5 6

Siemens S1/S3:

9 (Option téléphone), --> 7 (Statut téléphone), Bouton gauche du clavier menu, 5553756, Bouton rouge." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">For a monitor mode, top menu -> 9 (Phone Options) -> 7 (Phone Status), Left button on the keyboard menu, 5553756, red button.
The menu appears with Networking option, made right on the keyboard menu, and test indicators appear.
Numéro canal." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">CH -> channel number.
Force signal (dB)." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">RX -> Signal Strength (dB).
NCC (Code couleur)." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">N -> NCC (Color Code).
BCC (Code couleur)." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">B -> BCC (Color Code).
Cell ID (Identification cellule en hexadécimal)." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">CI -> Cell ID (cell ID in hexadecimal).
Critère de réception" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">C1 + -> Criterion Reception
Code d'identification de la zone géographique (LAC)" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">LAI -> code identifying the geographic area (LAC)
Puissance d'émission" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">TXPWR -> Power issue
Force de la réception de la BTS" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">RXAM -> Strength of receipt of the BTS
Time Slot" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">TS * -> Time Slot
Distance mobile-relais, /554m" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">* TA -> Distance mobile relay / 554m
Puissance d'émission" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">PL * -> Power issue
Table of power.
PL: 5 6 7 8 9 10 11 12 13 14 15
dB: 33 31 29 27 25 23 21 19 17 15 13
Watts: 2 1.3 0.8 0.5 0.3 0.2 0,130 0,080 .0.050 0,030 0.02

Évaluation de la transmission en continu." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">LF * -> Evaluation of streaming.
Évaluation de la transmission en discontinue." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">* LS -> Evaluation of discontinuous transmission.
Erreur de bit en continu pour la transmission vers le relais." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">QF * -> Error bit continuously for transmission to the relay.
Erreur de bit discontinu pour la transmission vers le relais." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">QS * -> Error bit for discontinuous transmission to the relay.
0 1 2 3 4 5 6 7
0.2% 0.4% 0.8% 1.6% 3.2% 6.4% 12.8% 25.6%

BER (bit error rate) table
QF / QS register: 0 1 2 3 4 5 6 7
% Of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

Siemens S3 Comfort / S4 / S4 Power

9 (Option téléphone), --> 8 (Status téléphone), --> Bouton 7 + votre IMEI --> Bouton gauche du clavier menu, 7684666, Bouton rouge." onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">For a monitor mode, made Menu -> 9 (Phone Options) -> 8 (Phone Status) -> Button 7 + your IMEI -> Left button on the keyboard menu, 7684666, red button.
Press the right button to switch from 1 to 2.

Siemens S15
Dual monitor mode Access menu: * # 7436367 * 8378 #

Siemens S25

Affiche le numéro IMEI, tapez sur la touche en haut à gauche, vous aurez la version logicielle (5 ou 10) et la mention FR/EFR/HR" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">After * # 06 # -> Displays the IMEI number, tap the top left, you will have the software version (5 or 10) and the reference FR / EFR / HR

Siemens S40

Menu Access Net monitoring:
Type: * # 36446337 # * 8378
Then press the green button and immediately after the red.
You now have access to menus "engineering" (maintenance / monitoring